Load-bearing requirements, foundations, and structural adequacy under the NCC
20 articles
What This Requirement Covers Lintels are horizontal structural members placed over openings - such as windows and doors - to transfer loads from the wall or...
What This Requirement Covers Engineered floor joist systems include manufactured timber I-joists, open-web floor trusses, and other proprietary engineered...
What This Requirement Covers This requirement covers the design, detailing and construction of structural steel connections used in residential buildings in...
What This Requirement Covers Soil classification and site investigation requirements set out how a site must be assessed before designing and constructing...
What This Requirement Covers Post and beam construction is a structural system that uses vertical members (posts) to support horizontal members (beams) which...
What This Requirement Covers This requirement covers the structural design and construction of swimming pool surrounds – the immediate built areas that form...
What This Requirement Covers Foundations for buildings on reactive clay soils address the risk of ground movement caused by seasonal moisture changes that...
What This Requirement Covers Structural adequacy requirements for decks and balconies set out the minimum strength, stiffness and connection standards needed...
What This Requirement Covers This requirement summarises the key construction, design and performance obligations for masonry walls in Australia as set out in...
What This Requirement Covers Removing or altering a load-bearing wall is a structural change that affects a building's ability to safely carry vertical and...
What This Requirement Covers Roof tie-down requirements in cyclone-prone areas set out how roofs, roof cladding and roof-framing must be anchored to resist...
What This Requirement Covers Earthquake design categories and seismic requirements in Australia set the minimum structural design actions and detailing needed...
What This Requirement Covers This requirement outlines the structural and related construction provisions that apply to pergolas and carports in Australia...
What This Requirement Covers This requirement covers the structural bracing of residential wall frames in Australia — the methods, locations and minimum...
What This Requirement Covers Concrete slab design requirements set minimum standards for slabs-on-ground and suspended concrete floors used in residential...
What This Requirement Covers Retaining wall structural requirements and height limits set out how earth-retaining structures must be designed, constructed and...
What This Requirement Covers This requirement covers the design and selection of timber framing members using span tables and load-bearing criteria for...
What This Requirement Covers This requirement sets out how steel framing and structural steel must be designed, constructed and detailed for single dwellings...
What This Requirement Covers Wind load requirements for roof structures under the National Construction Code (NCC) set the minimum design actions and...
What This Requirement Covers Minimum footing depth requirements set the vertical position and dimensions of footings, pads, piers and stumps for residential...